GM Type 2 Power Steering Hose Kit for Mustang 2 Rack and Pinion

It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Most who have tried it have found that the steering was twitchy or that it easily darts. This valve will replace the existing fitting in the back of the early GM power steering pump and reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures the problem.

Mustang II Power Steering Flow Valve for GM Pump, 2 GPM

Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts an aftermarket 1982-1988 T-Bird/Cougar type rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length. The pressure line in this kit has a 5/8 inch-18 male inverted flare fitting at the power steering pump end along with a -6AN to an 9/16 inch-18 (14mm-1.5) male O-ring fitting on the rack end.

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

1965-1979 GM/Ford Power Steering Hose Kit; Braided Stainless Steel - All American Billet 131151 - All American Billet Store

Speedway Motors Hotrod Mustang II Rack to Chevy GM Pump Power Steering Hose Kit

Aluminum GM Type II Power Steering Pump

18mm x 1.5 to 5/8-18 inverted flare These adapters will allow you to use a GM Type II pump with our Mustang II power racks. Perfect when doing an LS

MUSTANG 2 POWER RACK PINION HOSE KIT GM TYPE II PUMP O-RING TO INVERTED FLARE

GM Type II 2 Power Steering Pump Satin chevy power steering pump with RESERVOIR

Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts an aftermarket 1982-1988 T-Bird/Cougar type rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length. The pressure line in this kit has a 5/8 inch-18 male inverted flare fitting at the power steering pump end along with a -6AN to an 9/16 inch-18 (14mm-1.5) male O-ring fitting on the rack end.

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

GM Type 2 Power Steering Pump Fittings #6175ALP-27 - TUFF STUFF Performance Accessories

Aluminum 1987 Pontiac Sunbird GM Type 2 Power-Steering Pump. 17mm Shaft., Specifications:, 17mm Pilot Shaft, 16mm by 1.5 O-Ring Pressure Fitting,

Aluminum 1987 Pontiac Sunbird GM Type 2 Power Steering Pump

JEGS 60786 Rack & Pinion Kit 1979 Ford Mustang

Speedway Motors 1982-88 T-Bird Steering Rack to GM Pump Power Steering Hose Kit with Adapters, 5/8'-18 Inverted Flare Pump End, Suitable for Aftermarket Racks : Automotive

Rack and Pinion - Manual - Standard Ratio - 1979-93 Mustang - 8000440

CPP Mustang II Power Rack and Pinion Two-Piece Rack Hose Kit. Correct ends for GM power steering pump to 2-piece steering rack (74-78 Mustang II

CPP MUSTANG 2 II IFS STAINLESS STEEL POWER RACK PINION 2-PIECE RACK HOSE KIT